This Premium UV-Coated SPC Flooring is produced at our 10,000+ m² factory in Dongying, Shandong, where we have run SPC extrusion and UV coating lines for export since 2005. The plank is a five-layer composite: a UV-cured top coat, a wear layer, a high-resolution decorative film, a rigid SPC core, and an optional IXPE or EVA backing. The core uses PVC resin, mineral filler, and stabilizers — no wood powder, no urea-formaldehyde binder. We supply bulk orders with customizable thickness, wear layer, surface design, locking profile, logo, and packaging.
The plank is built as five stacked layers, each one doing a specific job. The order matters — a weak layer anywhere in the stack shows up as surface damage within the first year of commercial use.
Multiple UV coating passes cured under UV lamps. Forms the sealed top surface that resists daily wear, stains, and surface scratching. This is the layer that gets wiped, mopped, and walked on.
A transparent protective film over the decorative print. Its thickness sets the wear rating — we stock 0.3 mm, 0.5 mm, and 0.7 mm, and can run other specs on request.
Wood grain, stone, and solid-color designs printed at high resolution. Custom patterns can be produced against your artwork or a sample plank — minimum order applies.
PVC resin, calcium-based mineral filler, and stabilizers, extruded as one rigid board. Density and filler ratio determine rigidity and how the floor handles point loads from furniture.
Pre-attached acoustic backing for projects that need impact sound reduction and underfoot cushioning. IXPE is the denser option; EVA is the lower-cost option.
Three measurable surface properties come directly from the multi-pass UV coating. These are the points buyers ask about most, so we test them on every batch.
The multi-layer UV cure forms a dense, sealed film. Coffee, sauce, oil, and cosmetics sit on the surface instead of soaking in — a damp cloth removes them without leaving a mark. This is the practical difference against ordinary PVC-coated SPC, where pigments bleed into the coating within minutes.
The cured surface is harder than standard PVC coating, so it resists daily abrasion from shoe heels, dragged furniture, and pet claws. UV stabilizers in the coating block yellowing and fading from window light — the plank keeps its original color over years of sun exposure, which matters for south-facing rooms and retail windows.
The sealed coating has no microporous structure, so mold and bacteria have nowhere to take hold. In damp kitchens, bathrooms, and humid climates it stays clean without regular waxing. Cleaning is a vacuum or a dry-wet mop — no polish, no stripping, no special products.
We run OEM production for bulk flooring orders. Customers specify the product configuration against their target market or project, and we produce to that spec rather than forcing a catalog item. Customizable parameters include:
For projects comparing rigid core options, see our full SPC flooring range, or compare against HDF parquet laminate flooring if the project does not require a fully waterproof core.
Premium UV-Coated SPC Flooring is specified for indoor residential and commercial areas that need rigid-core construction, easy maintenance, and a protected surface. Common installations include homes, apartments, offices, hotels, retail spaces, and other indoor commercial areas with regular foot traffic and routine cleaning.
Product quality is evaluated against the actual configuration: raw materials, dimensional tolerances, surface condition, locking performance, and the applicable testing requirements for the destination market. For projects that need compliance documents, we provide available test reports and supporting documentation according to the selected specification and target market. Certifications we hold across the SPC range include CE, ISO 9001, ISO 14001, and the EU E1/E0 formaldehyde emission standard. Third-party testing (SGS, Intertek) can be arranged at the customer's cost.
It is rigid-core SPC flooring with a UV-cured protective surface. The structure normally includes a UV coating, a wear layer, a decorative film, and an SPC core, with optional IXPE or EVA backing.
The UV coating forms a sealed protective surface that improves resistance to daily wear, stains, and surface scratching, and makes routine cleaning easier. It is the top layer, not a treatment applied after installation.
Yes. The rigid SPC structure handles routine damp or wet cleaning when correctly installed. Standing water and prolonged soaking should still be avoided — wipe up spills rather than letting them sit.
The snap-lock profile is designed for floating installation without full-surface adhesive. The exact method depends on the product configuration and the subfloor — follow the installation instructions shipped with the order.
Yes. Wood grain, stone patterns, solid colors, and other decorative effects can be customized against your artwork or a sample plank. Minimum order quantity applies to fully custom designs.
Yes. We support OEM orders, including customized flooring specifications, decorative designs, locking profiles, logos, and packaging. Private-label cartons are produced per order quantity.
For an accurate quote, provide the required thickness, wear layer, size, surface design, locking profile, backing, quantity, and destination market. The destination market matters because compliance requirements differ by region.
Available test reports and compliance documents are provided according to the selected product specification and target market requirements. If your market needs a specific test, tell us at the quotation stage so we can confirm it against the production spec.
We ship free small samples (up to 3 pieces, freight collect) and produce custom thickness, wear layer, surface design, locking profile, logo, and packaging for bulk orders. Send your project details and we will come back with pricing, lead time, and a sample plan.
Address
200 meters south of Wuyi Village, Xinglong Subdistrict Office, Kenli District, Dongying City, Shandong Province, China
Tel
