A multilayer rigid-core floor with a high-definition marble decorative film. The standard build is UV layer + wear layer + marble film + SPC core, with optional IXPE or EVA backing for acoustic and comfort upgrades. Thicknesses run 3.5 – 8 mm, wear layers 0.2 – 0.5 mm, and locking profiles are available in single click, double click, or a custom profile. Manufactured by Shandong Mingzun New Materials Co., Ltd. — 10+ years of independent manufacturing, OEM and private label supported, MOQ 1×20GP, lead time 30 – 35 days after deposit.
Request samples & quotationMarble-look SPC is specified by buyers who want a stone appearance with click-lock installation — for hotel lobbies, retail floors, and residential interiors where tile would be too heavy and cold. The visual comes from a printed decorative film, not real stone. The performance comes from the rigid SPC core. Both parts of that sentence matter when you are matching a specification to a project.
Final specifications should be confirmed against order documents before production.
Each layer has a defined job. Removing one changes the performance, not just the cost.
Top coat that resists surface dulling from cleaning chemicals and daily light exposure. Applied after the embossing step.
Transparent protective film. 0.2 – 0.5 mm depending on the traffic class specified for the project.
High-definition print that produces the stone pattern. This is the layer that gets customized on OEM projects.
PVC and mineral filler extruded into a rigid board. Low water absorption, dimensional stability under load.
Optional IXPE or EVA foam. Adds underfoot cushioning and reduces footfall noise transfer to the subfloor.
OptionalMatch thickness and wear layer to site conditions, not to the surface photograph.
Specified when overall floor height and material cost need to be kept down. Suitable over a flat, stable subfloor with a fixed installation.
The most frequently ordered range. Handles residential traffic, hotel guest rooms, and general commercial interiors without needing a special subfloor.
Chosen where a solid underfoot feel is part of the specification, or where the subfloor is slightly less uniform and the extra rigidity helps.
For wear layers, the same logic applies. 0.2 mm is intended for lighter-use areas. 0.3 mm covers general residential and moderate traffic. 0.4 – 0.5 mm is specified for higher-traffic applications where the protective surface needs to last through more footfalls before showing wear. Thickness and wear layer are separate decisions — a 6 mm board with a 0.5 mm wear layer is a different specification from a 6 mm board with a 0.2 mm wear layer, even though the box may look the same.
The appearance comes from a printed film, not stone. Understand what that means for the pattern.
The marble appearance is created through high-definition decorative films that reproduce stone patterns, colour ranges, and veining effects. Surface options include embossed, wood texture, crystal, and refined emboss finishes — each producing a different relationship between the printed pattern and the physical relief on the surface. For OEM projects, decorative patterns, surface effects, dimensions and edge profiles can be customized to match a target market or an existing range you already sell.
Indoor spaces where a stone appearance is needed with rigid click-lock installation.
Living areas, hallways, and open-plan interiors where a marble appearance is preferred over wood. Suitable over underfloor heating when specified with the right subfloor.
Guest rooms, corridors, lobby floors. Rigid core holds geometry under rolling luggage and footfall.
Reception areas, showrooms, retail floors. The stone look fits corporate and retail design schemes.
Kitchens, utility areas, and semi-wet zones. Low core water absorption — joint and seam quality still determine the finished system.
Product specifications and installation methods should be determined according to subfloor flatness, humidity, traffic level, and applicable local installation requirements.
Where the specification is actually set — from mixing to packing.
PVC resin and mineral filler blended to the specified ratio.
SPC core extruded and cooled. Thickness controlled at this stage.
Marble decorative film and wear layer bonded to the core.
Embossing applied, then UV coating for the top protective layer.
Boards cut to size and milled for the specified click profile.
Dimensions, appearance, pattern consistency and profile checked before packing.
Quality control covers dimensions, thickness, surface appearance, decorative pattern consistency, locking profile and packaging. Available documentation includes ISO 9001, ISO 14001 and CE-related documentation where applicable. SGS test reports can be provided when available, and third-party pre-shipment inspection can be arranged for orders requiring independent verification. For performance claims such as wear resistance, water resistance, scratch resistance or emissions, the actual test results and the applicable test standards should be used as the basis for evaluation — not a marketing description.
10+ years of independent manufacturing. OEM produced to your specification.
Confirming the complete specification before quotation avoids later cost changes caused by modifications to dimensions, locking profiles or packaging. Mixed-color and mixed-size orders can be quoted together if the container plan is fixed early.
Buying Marble-Look SPC directly from the Mingzun factory cuts out middleman charges. Free product samples are offered before ordering so overseas clients can check the finish and real-world performance first.
Payment: 30% deposit, 70% against B/L copy. Sight L/C accepted for eligible large-volume orders.
Production lines run on standardized workflows and established management systems, supporting steady schedules and reliable delivery planning for full-container orders.
Issued to the manufacturing entity. Certificate copies available with quotation.
Questions that come up most often before a container order.
The SPC core has low water absorption characteristics and is suitable for routine mopping and selected moisture-prone indoor environments. However, waterproof performance should not be evaluated from the core alone. Locking joints, seams, subfloor conditions and installation quality all affect the performance of the complete flooring system.
The main difference is the thickness of the protective wear layer and its suitability for different traffic conditions. 0.2 mm is generally used for lighter applications, 0.3 mm for general residential and moderate-use areas, and 0.4 – 0.5 mm for higher-traffic applications or projects requiring a thicker protective surface.
Click-lock SPC flooring can generally be installed as a floating floor without applying adhesive across the entire back of the flooring. The actual installation method should be confirmed according to the locking profile, subfloor condition and local installation requirements.
Yes. OEM projects can be customized with different decorative films, colors, patterns and surface effects. Before mass production, the final color, pattern and approved sample should be confirmed to minimize visual variation between the approved sample and bulk production.
IXPE or EVA backing can improve underfoot comfort, reduce certain types of footfall noise and provide additional cushioning between the flooring and subfloor. The need for backing and the choice of material should be determined according to the project's acoustic, comfort and installation requirements.
The standard MOQ is 1×20GP. For OEM projects, the actual MOQ may vary depending on the decorative film, dimensions, packaging and other customization requirements.
Confirm thickness, wear layer, board dimensions, surface finish, locking profile and backing before quotation — we will respond with a factory-direct price and sample arrangement.
Contact us hereAddress
200 meters south of Wuyi Village, Xinglong Subdistrict Office, Kenli District, Dongying City, Shandong Province, China
Tel
